Particle board making machine

Particle Board Making Machine

Particle board making machine can be used in furniture-making, flooring-making, packing industry, sound box,

construction and decoration of vehicle or vessel etc.we can accept OEM service.

We also can change the working length and diameter of particle board making machine as your requirement, still can change the motor type (DC or AC).

In additon, we have rich technology experience and can design machine according to your requirement.

Product Description

This is a complete PB production line process drawing. Next we will introduce you to the machines and details of each process

so that you can better understand the flow and process of particleboard production and particle board making machine.

Chip preparation section:Drum chipper

The drum chipper reduces qualified chips with raw material, such as footpaths timber, branch wood, bamboo, wood processing waste, sawdust and other wood.

Then the chips are transported to the chip bin,

and then feed to the  knife-ring flakes by which the chips are turned to flakes, then the  flake stored in wet flake bin.

Flaking machine

The imported raw materials size:230*500mm

Fly number: 48pcs

Hot Air Dryer

Glue regulating and applying section: Dryer

This type of forming machine can make the board achieve better core structure to improve the physical and mechanics properties.

In addition, it can also significantly reduce glue consumption and board density without losing quality.

The surface and core flakes still are sent into classi-forming machine, and forming on the mat conveyor uniformly.

Pre-press Machine

After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor

and loading conveyor, mats are transported to carrier and then to hot press.

The continuous pre-press is to press the mat after forming so that the air inside the mat shall be pressed out partly and the strength of mat shall be increased.

Hot Press Machine

The automatic loader push the base board into hot press machine. After some certain time hot press will form the board greatly.

Obiously, after hot pressed , the conveyor unloads the board automatically.

Cooling Turner

Then, the star-cooler will cools the rough board.

Edge Trimming Saw Machine

Then the rough board goes through side trimming saw and become  a qualified particle-board, stacked on the hydraulic lifter.

Sanding Machine 

Finally, the board after trimming, the sanding machine will sand the board three times, then other machines will stack and classif these boards.

Sanding machine caters to the application of calibrating, finish sanding and polishing wood-based panel, such as particle board, MDF/HDF,

plywood, gypsum bonded particle board, cement bonded particle board, bamboo plywood or other wood based and non wood-based panel.

Certainly, this set of machine can produce particleboard of all thicknesses, such as 8mm, 9mm, 15mm, 18mm and so on.

Company Description

Welcome to contact us.